What are the characteristics of rubber?

Release Time:

2025-03-26

When rubber gaskets are molded, the adhesive force of the elastomer cannot

During the molding of rubber gaskets, the adhesive force of the elastomer cannot be eliminated after being pressed under high pressure, and extremely unstable shrinkage (the shrinkage rate of rubber varies depending on the type of rubber) often occurs when demolding. After a period of time, it becomes gentle and stable. Therefore, in the initial design of rubber products, both the formula and the mold must be carefully calculated for suitability. Otherwise, the product dimensions may be unstable, resulting in low product quality.

Rubber is a thermosetting elastomer, while plastic is thermoplastic and thermosetting. Due to the different types of vulcanizates, the temperature range for rubber molding and curing also varies greatly, and may even be affected by climate change and indoor temperature and humidity. Therefore, the production conditions of rubber products need to be adjusted appropriately at any time. Without appropriate production conditions, product quality may change.

If you've ever wanted to weatherproof an interior door or window, you might want

2025-03-26

What are the advantages of different types of oil rubber seals?

Nitrile rubber is the most common type of elastomer in the sealing industry.

2025-03-26

The structure and sealing principle of skeleton oil seals.

The skeleton oil seal is relatively simple, generally consisting of three parts

2025-03-26

How to classify rubber seals based on vulcanization methods?

Rubber waterstops can be classified in several ways, such as by cross-sectional shape

2025-03-26

What are the characteristics of rubber?